-
August 20th, 2001, 07:29 PM
#1
Inactive Member
Anyone in Chicago land area that might be able to answere a few questind about my newly installed JRSC?
------------------
AAAAWWWWWWW YYYYYEEEAAAHHH!!!
-
August 20th, 2001, 08:58 PM
#2
Inactive Member
not a JRSC owner...
but go ahead
------------------
<A HREF="http://www.drive.to/TCL
www.citylimitracing.com
1998" TARGET=_blank>www.drive.to/TCL
www.citylimitracing.com
1998</A> GSR black now yellow... FULL BLOWN PROJECT Y2K.
-
August 21st, 2001, 02:49 PM
#3
Inactive Member
I have a problem with tip-in det. and detonation at high rpm's. I am getting 10.5psi at 8k rpm. I have a Cartech 2005 FMU. I'm getting enough fuel under full boost, but my MSD BTC doesn't seem to be working well at those boost levels. I can hear a slight detonation coming in and out after 6500 rpm. As far as tip in I think the base pressure is set at 55psi atmospheric. Should I rase this?
------------------
AAAAWWWWWWW YYYYYEEEAAAHHH!!!
-
August 21st, 2001, 05:34 PM
#4
Inactive Member
I highly recommend picking up a JR MAP controller if you don't already have one. By the way, what pulley are you running on your JRSC kit? The stock one?
------------------
-
August 21st, 2001, 06:43 PM
#5
Inactive Member
ehich pulley do you have installed? I assume not the stock 6 psi pulley. You might try raising the static fuel pressure up to 58-60 and see if this helps. You will lose a little power, but hopefully it will stop the detonation. Also if you are purposefully running that high of psi you may want to get some larger injectors.
------------------
2000 SC'd GSR
[email protected] best before the blower.
www.strng1dah.homestead.com
-
August 21st, 2001, 09:38 PM
#6
Inactive Member
I am running the 3.8" pulley from Jackson. Thanks for the info guys
------------------
AAAAWWWWWWW YYYYYEEEAAAHHH!!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks